Lift kit +45 mm for Mercedes-Benz Vito and V-Class 447 2WD* (rear-wheel drive), from model year 2015 onwards.
The design of the lift kit ensures that the full suspension travel is retained on the front axle, whilst it is actually increased on the rear axle. The increased articulation ensures maximum off-road capability. Larger all-terrain tyres can be fitted in combination with this lift kit.
Suitable for:
|
Hersteller
Manufacturer
|
Typ
Type |
Gen-Nr.
Approval No |
Handelsbezeichnung
Commercial Name |
|
Mercedes-Benz
|
639/2 |
e1*2007/46*0457* |
V-Klasse, Vito, Vito-Tourer (W447) |
|
Mercedes-Benz
|
639/4 |
e1*2007/46*0458* |
Marco Polo (W447) |
|
Mercedes-BenzMercedes-Benz
|
639/5 |
e1*2007/46*0459* |
V-Klasse, Vito, Vito-Tourer, MIXTO (W447) |
The set includes:
- 2x spacer sleeves for the front suspension struts
- 2x spacer sleeves for the front suspension strut cups
- 2x spacer sleeves for the rear coil springs
- 2x link rods for the front anti-roll bar
- 2x high-performance dampers for the rear axle
- 1 pair of steering angle limiters
- 1 pair of brackets for the parking brake Bowden cables
- 1 set of mounting parts
For vehicles with LED headlights, the LED lighting kit, item no. TA-V2-101-30-002, is required.
*Also suitable for vehicles with factory-fitted increased ground clearance!
The kit includes a national component type approval (formerly known as a component certificate or ABE). An inspection (by TÜV or Dekra) is not required provided the specified instructions and conditions are observed.
In accordance with § 15 FZV, the registration certificate must be corrected at the next inspection by the registration authority.
Note on using the lift kit abroad: Please observe the country-specific regulations regarding vehicle lifts exceeding 30 mm for vehicles homologated in accordance with ECE pedestrian protection regulations. Please have the vehicle’s roadworthiness checked by your national inspection or registration authority prior to Installation.
For vehicles fitted with a tow bar as standard, the maximum permissible height of 420 mm (at maximum rear axle load) must be checked. If the tow ball becomes too high after the conversion, a height-adjustable tow bar (with a 2-hole or 4-hole flange) must be fitted.
*Not suitable for vehicles with air suspension (AIRMATIC).
Installation time: approx. 4.5 hours
This item replaces our item TA-V2-102-10-003
